Razer DeathAdder Elite And V2 looks quiet similar. But they are not similar. They have lots of difference between them. Today we will compare both of Razer DeathAdder Elite And Razer DeathAdder V2. If you also want to know the difference then read the full article till end.
Razer DeathAdder Elite Vs V2
Ther Razer DeathAdder Elite has 16000 Dpi, but Razer DeathAdder V2 has 20000 Dpi. Razer DeathAdder Elite has mechanical switch also Razer DeathAdder V2 has a mechanical switch. Razer DeathAdder Elite wire length is 4.46 but DeathAdder V2 has 6.88.
The DeathAdder Elite wire is braided type buy the DeathAdder V2 wire type is Razer™ Speedflex Cable. Razer DeathAdder Elite has RGB lighting but Razer DeathAdder V2 has chroma RGB lighting.
Razer DeathAdder Elite supports 50 million clicks but the Razer DeathAdder V2 supports 70 million clicks. Razer DeathAdder Elite has 7 programmable buttons but Razer DeathAdder V2 supports total of 8 programmable buttons.
(For more information we will provide a table comparison below. But if you are confused that which gaming mouse you should buy, then you can check out the buyer’s guide below)
They are now somehow “inserted/molded” into the plastic and have a smaller edge, where the plastic meets this other material, that I almost cannot feel compared to the Elite. The drawback of that is that the V2 is not as “grippy” as the Elite on the outside (right side). The left side is almost the same. But, if that is the price to pay for durability and if these things don’t fall apart on the V2, I can live with that. They are not that much worse compared to the Elite.
The optical buttons on the V2 are fine, even very good I would say. They are not as satisfying to click as the mechanical buttons on the Elite and definitely don’t sound as good, but they are supposed to have a faster response time and if they are more durable and don’t develop a double-clicking issue, I would be happy.
The side buttons feel exactly the same to me.
The DPI buttons are now smaller and harder to accidentally click. If you use them for something else other than changing the DPI, they are going to be worse for you, I guess. I’ve disabled them from Synapse, so they are the same for me.
The scroll wheel is worse. Specifically the surface. The scroll wheel on both the V2 and the Elite has a rubber surface. On the V2 the rubber surface is smoother and for me it doesn’t feel nice at all. The Elite has these circular “bumps” and it felt nicer, because of the indentation. The scrolling itself hasn’t changed a lot, but the scroll wheel on the Elite was better for me.
The coating on the Elite felt nicer for me. Supposedly, the new coating is better, because your hands should sweat less with it, but I never had issues with the Elite. The coating on the V2 is not as smooth. It’s a bitter “rougher”. However, I’ve got used to the new coating on the V2 and it doesn’t bother me that much.
This is a bit of a mixed bag for me. The cable on the Elite is great. It is thinner and stiffer than the “speedflex” cable of the V2, which for me means also more durable. I’m a Software Developer and I currently use the mouse for work as well, because I’m working from home. The cable on the Elite was better for me, when I’m using the mouse for work, but for gaming the cable on the V2 is just better. BY A LOT! It does what the name suggest. It’s elastic, folds easier, etc. I guess, overall the cable on the V2 is better.
The shape has changed a bit, but I don’t notice any difference at all. It is still very comfortable for me.
The sensor on the Elite is great and the one in the V2 is supposed to be better. I don’t notice any difference, but the V2 is supposed to be better.
The V2 is about 20 grams lighter than the Elite. I didn’t like that initially, because I like heavier mice, but I’ve gotten used to it and it feels better, especially combined with the cable and the new feet.
The feet on the V2 are simply the biggest and most noticeable difference for me compared to the Elite. The mouse glides so much easier and so much better than the Elite. It’s crazy how big the difference is. Especially, when you combine that with the new “speedflex” cable and the fact that the mouse is much lighter. It makes such a huge difference.
I should mention that I have a simple Amazon Basics Extended mouse pad, that I have to upgrade at some point, but I guess the improved feet and gliding should be noticeable on any mouse pad. For understanding the difference deeply, we have make a table comparison on it.
So, after 11 months of use, the rubber on the right side (outside) fell off and the mouse went back to Razer for replacement. I’ve sent it back on January 6th 2020 and received a replacement on February 14th 2020 after numerous emails. The Razer support is nice and the people reply to Emails, but you still have to wait.
The second Elite “survived” for only 2 months. After the first month I noticed the double-clicking issue on the left button. You can find a lot of information about it, if you Google it. A month later the rubber on the left side (inner side) fell off. The second sample went as well for replacement. It was a Taiwan sample. I read somewhere that the Taiwan samples are worse than the Chinese ones. I haven’t checked my first sample to see, if it was Chinese or Taiwanese.
So a fail rate of 100% for the rubbers on the sides. It’s impossible to glue them back to the mouse, because the plastic surface is too smooth/polished/shiny and a normal super glue simply doesn’t stick to the plastic.
Razer DeathAdder E;ite is more better than Razer Deathadder V2. Razer DeathAdder Elite performance Is more better than Razer DeathAdder V2. Razer DeathAdder Elite Has Mechanical Button but Razer DeathAdder V2 has Optical+Mechanical Switches.
Razer DeathAdder Elite Vs V2 (Table)
|Name||Razer DeathAdder Elite||Razer DeathAdder V2|
|Wire Length||7.0 ft (2.1 m)||7.1 ft (2.2 m)|
|Scroll Wheel||Notched Wheel||Notched Wheel|
|Software Name||Razer Synapse 3||Razer Synapse 3|
|Weight (With Cable)||131 g||131 g|
|Weight (Without Cable)||99 g||83 g|
|Right Hand Use||Yes||Yes|
|Left Hand Use||No||No|
|Dimensions (LxWxH)||2.9 x 1.69 x 5 inches||2.87 x 5 x 1.69 inches|
|Maximum Polling Rate||1000 Hz||1000 Hz|
Razer DeathAdder Elite
- The #1 Best-Selling Gaming Peripherals Manufacturer in the US: Source – The NPD Group, Inc., U.S. Retail Tracking Service, Gaming Designed: Keyboards, Mice, PC Headsets, and PC Microphones, Based on dollar sales, Jan. 2017- June 2020 combined
- High-Precision 16,000 DPI Optical Sensor: Offers on-the-fly sensitivity adjustment through dedicated DPI buttons (reprogrammable) for gaming and creative work
- Immersive, Customizable Chroma RGB Lighting: Includes 16.8 million colors w/ included preset profiles; syncs with gameplay and Razer Chroma-enabled peripherals and Philips Hue products
- 7 Programmable Buttons: Allows for button remapping and assignment of complex macro functions through Razer Synapse
- Ridged, Rubberized Scroll Wheel for Maximum Accuracy: Small, tactile bumps increases grip and allows for more controlled scrolling in high-stakes gaming situations
- Durable Mechanical Switches: Supports up to 50 million clicks, backed by a 2 year warranty
Design And Frame
The Deathadder Elite is the exact same dimensions as its previous iteration at 12.7 x 7 x 4.4 cm and its designed to fit medium-sized hands. Some do find it a bit long but it’s only a millimetre shorter than the EC1-B from Zowie whilst being the same amount wider and higher. It’s a great size and fits in my hand snuggly, you can actually notice the 1mm difference in length to the EC1-B. I can relax my palm and hand on the mouse when casually browsing without touching much of the mouse pad.
However, when it comes to gaming the smoothly rounded hump in the middle supports me leaning with my knuckles and gives my grip extra comfort. The mouse is great for my hand (18×11 cm) but if you have long hands don’t be put off, its shape feels long enough to accommodate for longer hands while being wide enough to support even the thickest of sausage fingers.
The Deathadder is a mouse for all and has cut the weight by around 40g from its previous version (148g) which is a massive difference. It doesn’t feel heavy at all and could, without doubt, be used by a gamer with small hands thanks to the shape being so easily gripped.
Sensor And Dpi
The Deathadder Elite replaces the DA Chroma and features the PMW3389 which is a custom made sensor between razer and PixArt and brings up to 16,000 DPI. This newer version also carries a few extra buttons for on the fly DPI switching.
It weighs a mere 96 grams which aren’t too bad and sees it somewhere in the middle when comparing to others. Its awesome shape means a variety of hand sizes and grip types are compatible with the Deathadder.
The Elites primary buttons feature co-developed Omron switches that last 50 million clicks which is very durable. They have an excellent actuation and a very satisfying audible click. It’s worth noting the main buttons are part of the main shell to the mouse but this didn’t bring any issues and the switches were still easily clickable when placing my fingers further towards the middle of the mouse. In full palm grip, I did accidentally click the right-hand primary button a couple of times but it was while browsing the internet not playing.
There is a clickable scroll wheel sat in the middle of the switches as you would expect which you can program. The wheel gives tactile feedback when you scroll and does it almost silently which I like as I found the new Zowie EC series to be far too loud when scrolling. There is a nice bumpy rubber texture on the wheel to give you some extra grip.
Overall the Deathadder Elite is a brilliant mouse. It’s worth mentioning you could probably get a similar spec mouse for less like the Hyperx Pulsefire Pro but would it have the same shape and materials? No. I don’t think the value of the Deathadder is bad at all and I know Razer does charge a premium but this mouse is surely worth it. It has one of the comfiest shapes I’ve ever played games with and it’s so good it feels natural across all games I’ve played not just FPS.
The finish and added grip are a welcomed change from older versions as the mouse now sit permanently in my palm and it’s very hard to lose control of the mouse. It doesn’t feature any cosmetic customization and it doesn’t have as many programmable buttons as other mice do but this high-performing serpent is the deadliest I’ve ever held and has to be considered by the masses!
Razer DeathAdder V2
- The #1 Best-Selling Gaming Peripherals Manufacturer in the US: Source – The NPD Group, Inc. U.S. Retail Tracking Service, Keyboards, Mice, PC Headset/Pc Microphone, Gaming Designed, based on dollar sales, 2017-2021
- Focus+ 20K DPI Optical Sensor: Auto-calibrates across mouse mat and reduces cursor drift from lift-off and landing for industry-leading precision
- 3x Faster Than Traditional Mechanical Switches: New Razer optical mouse switches uses light beam-based actuation, registering button presses at the speed of light
- Immersive, Customizable Chroma RGB Lighting: Supports 16.8 million colors w/ included preset profiles; syncs with gameplay and Razer Chroma-enabled peripherals and Philips Hue products
- 8 Programmable Buttons: Allows for button remapping and assignment of complex macro functions through Razer Synapse 3
- Drag-Free Cord for Wireless-Like Performance: Razer Speedflex cables eliminate the need for mouse bungees, drastically reducing weight and drag for absolute control
Design And Frame
The Razer DeathAdder V2 feels very well-built. Even though this mouse is quite a bit lighter, the build quality is the same as the previous version but has better feet and a much better cable. The Razer DeathAdder V2 uses Razer’s new and improved cable. It’s a huge improvement over previous versions and feels very sturdy but is much more flexible and less rigid.
That isn’t to say the DeathAdder V2 is unwieldy—it weighs just 0.18 pounds (81.6g). I use daily either (5 x 2.4 x 1.7 inches versus 4.9 x 2.4 x 1.5 inches) despite looking a lot bigger. A combination of the mouse’s contoured shape, material, and slightly larger dimensions makes it seem bigger than it really is. Most people shouldn’t have a problem using the mouse with either a palm grip or claw grip.
You can also customize the DeathAdder V2’s RGB lighting via Synapse as well. The software offers five default effects to use (Audio Meter, Breathing, Reactive, Spectrum Cycling and Static). Synapse can also set the lighting’s brightness, change when the lighting turns off and synchronize the mouse’s dancing lights with other Razer Chroma-enabled products.
Sensor And Dpi
And then we come to the sensor, Razer’s ‘party trick’ (the Deathadder Elite’s stats are in parentheses for comparison). It goes up to 20,000 DPI/CPI (16,000), tracks up to 650 inches per second (450), and has a resolution accuracy of 99.6 percent (99.4 percent). Those increased numbers may or may not mean much to you, because they’ll make very little difference in day-to-day performance. How often do you need to go above 16,000 DPI/CPI? Not often.
What I will say is that the V2’s sensor performed flawlessly. It felt accurate, snappy, and smooth, even when I used it on my desk without a mouse mat. The new PTFE mouse feet (which is the same material used to coat non-stick pans) glided over any surface I tried them on, including a leather sofa. By comparison, the Elite’s feet are non-PTFE, and don’t have as smooth of a feel.
The left and right mouse buttons are more durable than the Elite, too. They’re optical, rather than mechanical (they use an infrared light beam to register clicks), which means they should deliver fewer misclicks, lower latency, and have a longer life. Razer reckons they’ll last 70 million clicks, rather than the 50 million for the Deathadder Elite.
While I can’t possibly tell how accurate that number is, they certainly felt as responsive as I could ever need, and I never misclicked. In games of Fortnite and Escape from Tarkov my shots felt instant, and I never had to worry about firing accidentally.
So, this is actually quite a substantially different mouse to any previous version of Razer’s mighty DeathAdder mouse. With improvements across the board the new DeathAdder v2 is an outstanding gaming mouse, and one with an impressive feature list that’s perfect for twitch shooters. It’s robust, accurate, and feels as good as, if not better than, any other Razer mouse I’ve ever had in my claw grip.I have much satisfied with its performance.
At this point I wasn’t sure, if I should get the V2, because of the Razer build quality and all these negative reviews about the V2. But I like the shape of the mouse a lot, so I ordered a V2 from Amazon anyway and decided to return it, if I don’t like it.
Is Razer DeathAdder Elite Durable?
Yes. Razer DeathAdder Elite, a version Razer claims has unprecedented speed, accuracy and durability. It’s got a new optical sensor that not only has a huge 16,000 dpi resolution, but also tracks across your mousing surface at a blazing 450 inches per second.
Is The Razer DeathAdder Worth It?
Razer’s DeathAdder Elite is the go-to mouse for millions of gamers around the world, and today, you can join them at a cheaper price than they likely paid. It is very comfortable, and while the larger size may take some getting used to compared to a standard office mouse, it’s well worth it.
Is DeathAdder V2 Better Than Elite?
The Razer DeathAdder V2 is a better mouse than the Razer DeathAdder Elite. It’s lighter, has a much less stiff and rigid cable, a better sensor, and on-board memory so you can save your customization settings to the mouse and keep them if you switch PCs. But some people says that Razer DeathAdder Elite is more better then the V2.
Is DeathAdder V2 a RGB?
Yes. The Razer DeathAdder V2 features a full spectrum of 16.8 million colors supported by Razer Chroma RGB via Razer Synapse 3.
What Is The Difference Between Razer DeathAdder Elite And V2?
Ther Razer DeathAdder Elite has 16000 Dpi, but Razer DeathAdder V2 has 20000 Dpi. Razer DeathAdder Elite has mechanical switch also Razer DeathAdder V2 has a mechanical switch. Razer DeathAdder Elite wire length is 4.46 but DeathAdder V2 has 6.88. The DeathAdder Elite wire is bradied type buy the DeathAdder V2 wire type is Razer™ Speedflex Cable. Razer DeathAdder ELite has RGB lighting but Razer DeathAdder V2 has chroma RGB lighting.